User guide

Streaming
53
Lecture Recorder x2 User Guide
Figure 33 MPEG-TS RTP/UDP Push Functionality
To view the stream you need a link: udp://@ip:port (for example,
rtp://@226.63.45.23:6000).
To get the link for the stream, select the Info section of the Web admin interface
and view the Stream Info pane.
9.3 UPnP
The VGADVI Recorder supports a set of networking protocols named Universal Plug
and Play (UPnP). It allows you to discover a presence of the functioning VGADVI
Recorder on the network using a device such as media player connected to a TV set.
Once the VGADVI Recorder is connected to a network, it automatically establishes
working configuration with the media player and can share the data stream.
To use the UPnP functionality, you must configure the following file and streaming
settings in the Web Admin interface:
Video codec
H.264
Audio codec
MP3 or AAC. Alternatively you may configure UPnP without
selecting any audio codec.
File type
MPEG-TS – to obtain access to the files recorded earlier.
This functionality is enabled in the UPnP section of the Web Admin interface. The
media player identifies the VGADVI Recorder as a media server. In the explanations
below the UPnP settings are illustrated by the example of the media player Asus
O!Play.
To establish UPnP connection:
1. Set up the VGADVI Recorder and start streaming/recording.
Make sure the viewer password is not set up.