User guide

Streaming

Lecture Recorder x2 User Guide

Figure 32 MPEG-TS UDP Push Functionality

To view the stream you need a link: rtp://@ip:port (for example,

rtp://@226.63.45.23:6000).

To get the link for the stream, select the Info section of the Web admin interface

and view the Stream Info pane.

9.2.3.2 UDP Push streaming for the MPEG-TS file format

To configure UDP transporting for the MPEG-TS stream, select using MPEG-TS for

UDP Push from the drop-down list.

To use the UDP Push streaming, you must configure the following streaming settings

in the Web Admin interface:

Video codec

H.264

Audio codec

MP3 or AAC

To use this option:

1. Select Publish Stream from the main menu.

2. Select using MPEG-TS for UDP Push from the drop-down list.

3. Enter a destination multicast IP address. At this target point the broadcast

will be viewed.

4. Specify the number of the destination port where the broadcast will be

received.

5. Click Apply.