User guide

Streaming
51
Lecture Recorder x2 User Guide
Figure 31 RTP/UDP Push Functionality
9.2.3.1 RTP/UDP Push streaming for the MPEG-TS file format
The Web interface allows you to set up the MPEG-TS stream using MPEG-TS for
RTP/UDP Push and MPEG-TS for UDP Push options. These options are used, for
example, when you need to add a VGADVI Recorder’s stream to an IP TV or set-top
box’ playlist.
To use the RTP/UDP Push streaming, you must configure the following streaming
settings in the Web Admin interface:
Video codec
H.264
Audio codec
MP3 or AAC
Using the first of these options it is possible to configure RTP/UDP transporting for
the MPEG-TS stream.
To use this option:
1. Select Publish Stream from the main menu.
2. Select using MPEG-TS for RTP/UDP Push from the drop-down list.
3. Enter a destination multicast IP address. At this target point the broadcast will
be viewed.
4. Specify the number of the destination port where the broadcast will be
received.
5. Click Apply.