User guide

Channel Setup
39
Lecture Recorder x2 User Guide
streaming is being used and there are two streams, this
value remains the same for both of the URLs being used.
The port number cannot be lower than 500.
In case of RTSP streaming this value is not considered.
RTSP streaming port
The number of the port being used to stream the RTSP
broadcast. This value would be used along with the URL
to access the broadcast. In the case when independent
streaming is being used and there are two streams, this
value remains the same for both of the URLs being used.
The port number cannot be lower than 500.
Figure 19 Common Settings
The Page refresh time parameter in the MJPEG webpage section is available if the
Motion JPEG codec is selected.
Page refresh time
Specify how often the browser updates the visual
information coming from the Lecture Recorder x2. In
other words, how often the page is refreshed
8.6 Select Audio Format
The Audio settings pane in the control interface can be accessed by clicking the
Stream Setup option from the menu. Select the Enable audio checkbox and specify
the audio signal parameters.