User guide

Channel Setup
32
Lecture Recorder x2 User Guide
This parameter can be set for the H.264 codec only.
Enhanced compatibility
mode (h.264 slicing for
RTP)
This parameter provides operating stability if the
transmitted video/audio stream is not quite supported
by the viewer’s equipment.
When this parameter is activated, each picture is
subdivided into one or more slices. The slice is given
increased importance in H.264 as the basic spatial
segment that is independent from its neighbours. Thus,
errors or missing data from one slice cannot propagate
to any other slice within the picture.
Lecture Recorder x2 can capture analog and digital signals. When you log in to the
control interface, under the Stream Setup section you can configure both Lecture
Recorder x2 channels– DVI channel and Video channel. The following sections
explain how to configure both channels.
8.2 DVI Channel Setup
The following settings can be made for the DVI channel:
Figure 16 DVI Channel Settings
Below is a table showing the DVI source settings that are configurable.