User guide

Physical Attributes
9
Lecture Recorder x2 User Guide
Figure 2 The Lecture Recorder x2's Rear Panel
Below is a chart detailing the connectors found on the rear panel.
Table 2 Summary of Connectors on the Rear Panel
Number
Connector
Description
8
Audio Out
Connects audio equipment, such as headphones or
speakers, to confirm whether the audio stream is
currently being captured by the Lecture Recorder x2.
9
DVI Out
Used to verify and confirm that the connected video
source from DVI In port is being received. A DVI
monitor or projector can be used with this port using
the included DVI to DVI cable. Alternatively, if the
device to be used to confirm the receiving DVI input
signal is a VGA monitor, use the included DVI to VGA
cable.
This output can also act as a converter. For example if
a VGA signal is on the input, the output can be
provided as DVI or VGA.
Note: To confirm that the connected video source from
S-Video port is being received, please refer to the
Troubleshooting chapter.
10
USB port
This is an additional USB expansion port as described