User guide

Configuring Using a Third-Party Application
116
Lecture Recorder x2 User Guide
Key is the name of the object of the Lecture Recorder x2 to be viewed or changed.
See the next section for more information on the valid values for key.
Value is the value to be set. Some values include spaces, for example, the frame
size can be 1024 x 768. Use %20 for spaces, for example:
framesize=1024%20x%201068
You can include multiple <key>or <key>=<value>statements in one URL. Separate
the statements with &.
For example:
• To get the product name and firmware version:
http://<address>/admin/get_params.cgi?product_name&firmware_version
• To set the stream type to ASF and bit rate to 256000:
http://<address>/admin/set_params.cgi?streamtype=2&vbitrate=256K
For third party applications like wget, you should always include the admin
username and password to change the Lecture Recorder x2 configuration. The
syntax for using wget to enter URLs is:
19.5 Keys for HTTP API Commands
This section lists and describes all of the keys that can be used in HTTP API
commands to view or change the Lecture Recorder x2 configuration. These keys are
broken into the following types:
 Device Info Keys
 Broadcasting Setup Keys
 ASF Encoder Keys
 RTP Unicast Keys
19.6 Device Info Keys
These keys are used for getting information about the device.
Table 19 Device Information Keys
Key
Description
vendor
Name of a vendor. The value is always "Epiphan Systems