User guide

Physical Attributes
7
Lecture Recorder x2 User Guide
Figure 1 Front View of the Lecture Recorder x2
Below is a table summarizing the connectors and indicators found on the front panel
of the Lecture Recorder x2.
Table 1 Summary of the Front Panel's connectors and Indicators
Number
Name
Description
1
Factory Reset
Button
Resets the Lecture Recorder x2 back to its factory
configuration defaults. In order to avoid accidentally
resetting the device, a special sequence is required:
 disconnect power to the device,
 press and hold the Reset button as you
reconnect the power.
 the blue LED lights up.
 keep pressing the Reset button until the blue
LED turns off and the green LED lights up.
 release the Reset button.
Refer to the Restoring the Lecture Recorder
x2 Default Factory Configuration section.
2
Record
Stop/Start
Toggle
Record on/off: toggles the recording on/off status.
3
Power and
Capture LEDS
Red LED: During operation the red LED blinks each time
the Lecture Recorder x2 captures an image. The red
LED can be used as an indicator that the Lecture
Recorder x2 is capturing images. When the input
signal(s) stop(s) sending images, the red LED stops