User guide

System Administration
99
Lecture Recorder x2 User Guide
5. To complete the firmware upgrade you must reboot the Lecture Recorder x2.
Refer to the section, Rebooting or Restarting Lecture Recorder x2.
6. Log into the Web admin interface and confirm that the Lecture Recorder x2 is
now running the new firmware version by selecting Info from the main menu
and by viewing the firmware version.
Should the firmware update fail, restore to the default factory configuration. Refer
to the section Restoring the Lecture Recorder x2 Default Factory Configuration.
Figure 64 Firmware Upgrade
12.6 Maintenance Controls
From the Web admin interface’s main menu, select Maintenance to perform
operations such as restoring the factory configuration, and rebooting the Lecture
Recorder x2.