Specifications

PART 8: Releases and Features
This section outlines the features introduced with each product release.
Release 3.11 Features
Improved USBDrive Support
Choose what happens when you insert a USBdrive
You can now select what happens when you insert a USBdrive: nothing; a one-time copy or transfer to the drive; a
manual copy or transfer to the drive; or automatic continuous copy or transfer of recorded files to the drive.
Additionally, the Web Interface now shows you the available free space on your inserted USBdrive.
Record directly to a USBdrive (VGADVIRecorder)
With VGADVI Recorder (only), you can now choose to record files directly to your attached USBdrive rather than
recording to internal storage. A confidence-monitoring system shows you a read-only list of the recordings on the
USBdrive.
Automatic file upload to a USBdrive
As of 3.11.0, you can configure the device to automatically upload recorded files to an attached USBdrive. Choose to
either have it work the same way as uploading via FTP, CIFS, or RSYNC; or as a one-time download of all the recordings
on the device.
Wider support for USBflash drives
Previously some USBdrives were not supported due to disk partitioning. Lecture Recorder x2 now supports USBdrives
with non-typical data partitions. When the USBdrive is attached, the first partition with a supported file system is used
for data storage.
See Upload to an External USB Drive.
Audio Features
Audio inputlevel meter
Audio inputs that have an incoming signal and are part of a configured stream now have an audio signal level meter on
the stream information page.
The new mobile interface also displays the audio input level meter.