Specifications
Lecture Recorder x2 User Guide 7-0 Mobile / Tablet Operator Interface
7-0
Mobile / Tablet Operator Interface
Epiphan's tabletinterface is designed for touch-screen devices. Use your tablet or mobile device to perform
confidence checks and basic operator tasks such as verifying disk space or starting and stopping recording.
This section describes procedures for the following topics:
l Connect to the tablet interface
l Confidence monitoring using the tablet interface
l Verify disk space via the tablet interface
l Control recording via the tablet interface
l Switch to the full admin interface
Connect to the tablet interface
To get started with the tablet interface you can connect to it in one of the following ways.
The device connecting to the tablet interface must be on the same network as the Lecture
Recorder x2 or must be physically connected to it via USB.
l Use the browser over Ethernet
l Use tethering on your device
l Use the mobile version of Epiphan Connect
Use the browser over Ethernet
You can connect to the tablet interface with a browser on your admin computer, tablet, or touch-screen device.
To connect to the tablet interface:
1. Connect to the admin interface using your preferred connection mechanism. See Connect to the Admin
Interface.
2. Login as admin or operator.
3. Connect to the Admin Interface
http://<ip address of device/admin/m
or
http://<serial number of device>.local/admin/m
145