Specifications
Lecture Recorder x2 User Guide 4-1 Stream your video
rtp://@226.10.24.32:7000
To view the stream when SAP announce has been set and the stream is advertised on a media player, set-top-
box or Smart TV, refer to Viewing with SAP Announce.
Stream content using UPnP
Using the Universal Plug and Play (UPnP) networking protocol, your Lecture Recorder x2 can be discovered and
can stream to software and hardware media players, set-top-boxes and Smart TVs with ease. If UPnP is
enabled, the device automatically establishes communication with media players on the network.
UPnP uses MPEG-TS over HTTP with the H.264 codec and MP3 or AAC audio encoding (or no audio). You can
only access live streams or recordings that meet these requirements.
For security reasons the default behavior prevents UPnP access to live streams and recorded files.
This section covers the following topics:
l Enable UPnP
l Disable UPnP
l Stream your video
l Auto-restart playback to a UPnPDevice
l Change UPnPdevice name
Some players will not be able to access the stream or saved recordings if a view password is set. If
needed, see Removing User Passwords to clear the viewer password.
The topics in this chapter include how to enable and disable UPnP and how to control media players from the
Lecture Recorder x2. To choose recordings or live streams from your media player, see Viewing with UPnP .
Enable UPnP
Enable UPnP to allow digital media players on the network to browse for media or live streams from your
device.
Streams and MPEG-TS recorded files must use the supported codecs: H.264 with MP3 or AAC
audio. Having a viewer password could prevent the ability to use UPnP.
To enable UPnP:
101