User Manual

Pearl-2 User Guide Configure the touch screen

2. From the Configuration menu, click Touch Screen. The touch screen configuration page opens.

3. Uncheck Show system status to prevent the system status screen from opening on the touch

screen. Check Show system status if you want to enable the system status screen to open on the

touch screen.

4. Click Apply.

Disable or enable configuration using the touch screen

You can apply configuration presets and configure network settings using the touch screen on Pearl-2 by

default. You can disable this ability using the Admin panel.

If configuration is blocked and system status is permitted, touch screen users see an i icon instead of the

configuration gears icon in the lower right corner of the touch screen.

To disable or enable configuration using the touch screen:

1. Login to the Admin panel as admin, see Connect to the Admin panel.

2. Select the Touch Screen link in the Configuration menu. The touch screen configuration page opens.