User Manual

Pearl-2 User Guide Configure a video input source
2. From the Inputs menu, click the source name. The configuration page for the source opens.
3. Click on the input port's name that appears at the top of the page. The text turns red.
4. Enter the new name using alphanumeric characters. We recommend using underscores to separate
words rather than using spaces.
5. Press Enter using your keyboard to save the new name.
Configure a video input source
The captured video source doesn't usually need configuration, but you can change some of the settings using
Admin panel.
To open the configuration page for an input source:
1. Login to the Admin panel as admin, see Connect to the Admin panel.
2. Ensure a source is connected to the input port, see About connecting video and audio sources.
3. From the Inputs menu, click the source name. The configuration page for the source opens.
281