User Manual

Pearl-2 User Guide Tether to a mobile network
1. Login to the Admin panel as admin, see Connect to the Admin panel.
2. From the Configuration menu, select Security. The Security configuration page opens.
3. Under HTTPS configuration, check Secure connection (HTTPS).
4. (Optional) Change the default HTTP and the HTTPS port numbers. Consult your network administrator.
5. (Optional) Upload a new certificate and private key as required. You can request those from your
network administrator.
If the required certificate isn't included in the list of certificates on Pearl-2 when you
try and connect to Pearl-2 using a web-browser, you'll receive a warning that the
device isn't trusted.
6. Click Apply when you're done.
7. Reboot Pearl-2 when prompted. After the system has finished rebooting, log back in to the Admin
panel as admin and verify that all changes were applied.
If you need to delete the certificate you uploaded and the private key, click Delete
certificate, or click Restore default certificate.
Tether to a mobile network
Pearl-2 supports tethering to a mobile device over USB. You can use tethering to access a mobile hot spot for
live streaming, or have the tethered mobile network on standby as a backup network for your Ethernet
connection (or use the Ethernet connection as the backup for your mobile hot spot).
107