User Manual

Pearl-2 User Guide
Stream, record, and monitor using the Dashboard
interface
Show or hide audio inputs
You can pick which audio inputs display in the Dashboard view. Just tap the Audio inputs header and then
check the checkbox next to the name of each source you want showing in the Dashboard view. Tap Save
when you're done. The Dashboard audio input list updates automatically.
Monitor and setup the output port source and audio
The Dashboard lists the output ports along with the resolution and frame rate. You can enable and disable a
video output port, as well as choose if you want to display a channel or a video source. You can also enable or
disable the audio volume for the output port. However, you cannot hide video output ports from displaying
on the Dashboard.
To configure the output port audio using the Admin panel, see Disable or enable audio and output port
volume.
l Green text means your output is connected and transmitting to your external display.
l Grayed-out text means the output port is disabled.
l White text means the output port is enabled but is not connected to an external display.
Click the name of a video output to open the port's details in a thumbnail view.
80