User Manual
Pearl-2 User Guide Connect using persistent static IP address
http://<serial>.local/admin
For example: http://95dd40d5.local/admin
If HTTPS is enabled on Pearl-2, replace http with https in the URL.
3. Enter your user name and password when prompted, then click OK. The administrative user name is
admin. Initially no password is set. To set a password, see User administration.
4. (Optional) From the Configuration menu, click Network and note the IP address of the system from
the network configuration page.
Connect using persistent static IP address
Pearl-2 has a default persistent static IP address, also known as the recoveryIPaddress. If ever you need to
set up Pearl-2 on a network that does not support DHCP, or you need to recover from a previous static IP
address setting, you can use this procedure to connect directly to the system for configuration.
A workstation computer with access rights to modify your network settings is required.
Pearl-2 static IP address defaults are:
l IP Address: 192.168.255.250
l Netmask: 255.255.255.252
l Username: admin
l Password: your admin password (by default set to no password)
To access the Admin panel using the persistent static IP address:
68