User Manual
Pearl-2 User Guide
Do a one-time copy/move all recordings to USB storage
device
1. From the Automatic File Upload configuration page, select External USB Drive as the protocol
transfer type.
Table 68 If your Automatic File Upload setting conflicts with your new USB device setting, a message is displayed.
Click the fix it link and click Apply.
The fix it link disables any other type of automatic file upload you have configured. When
you are done with USB uploads, return to the Automatic File Upload configuration page
and reconfigure your AFU settings.
2. Select Create a subfolder for each channel to have recordings organized by channel.
3. Click Apply.
Do a one-time copy/move all recordings to USB storage device
When one-time move/copy of files is configured, Pearl-2 automatically starts copying files as soon as you
connect a USBstorage device to one of the USB ports.
Newest recordings are copied first. Files continue copying over until one of the following events occur:
l all files are copied
l the specified maximum number of files are copied
l the target drive runs out of storage space
File that are currently recording do not transfer until recording ends.
The following table describes the options available for a one-time move/copy of files to a USB storage device.
393