User Manual

Pearl-2 User Guide Configure AFU to WebDav server parameters
Name Description /Options
Use temp file
Causes files to be named with .part extension on the server during active upload. When
the upload completes, the file is renamed to the appropriate extension (.mov, .mp4 or
.avi).
Prerequisites
l Channels and recorders are already added for AFU, see Choose files to include in AFU
l AFU is enabled and the parameters configured, see Enable AFU and set parameters.
To configure upload to a WebDav server:
1. From the Automatic File Upload configuration page, select WebDav Client as the protocol transfer
type.
2. Specify the target Server address. If your system is configured with DHCP or has a valid DNS
configuration (see Configure DHCP), you can use the server’s fully qualified domain name instead of
the IP address.
3. Specify the Server Port used for the target WebDav server. The standard port is 21.
4. Enter the FTP account username in the Login field.
5. Enter the FTP account password in the Password field. The characters are masked with dots.
6. Select Enable HTTPS if you need a secure HTTPS link to the WebDav server.
7. Select Use temp file to name files with a temporary filename extension (.part) on the server until
391