User Manual

Pearl-2 User Guide Configure AFU to AWS S3 parameters
Configure AFU to AWS S3 parameters
You can automatically upload recordings to an Amazon Web Server (AWS) when you select AWS S3 as the AFU
protocol transfer type using the Admin panel.
The following table describes the parameters to configure AFU to a bucket on Amazon Simple Storage
Solution (S3).
Table 66 AWS Automatic Upload Configuration Parameters
Name Description
AWS Region Code
The geographical region of the AWS server that contains the bucket you want to
upload to, e.g. us-east-2.
Bucket
The id of the data storage container you created in Amazon S3 for the recorded live
streaming files.
Access Key Id
The Access Key Id is part of your access key for your AWS account, i.e.
GAKSOSIFDONN2EXAMPLE.
Secret Access Key
The secret access key is part of your access key for your AWS account,
i.e.bHaprXUenFEMI/K6MANVG/cPxDfiBYEXAMPLEKEY.
Session Token
The temporary security token provided by the AWS Security Token Service (STS) that
allows access to your AWS account for authorized users.
Prerequisites
l You must have read and write privileges for your AWS account to setup AFU to upload to an AWS S3
location
l Channels and recorders are already added for AFU, see Choose files to include in AFU
l AFU is enabled and the parameters configured, see Enable AFU and set parameters.
To configure upload to AWS S3:
1. From the Automatic File Upload configuration page, select AWS S3 Client as the protocol transfer
type.
389