User Manual

Pearl-2 User Guide Configure AFU to SFTP server parameters
Table 65 SFTP Automatic Upload Configuration Parameters
Name Description
Server
address
The IP address or fully qualified domain name of the SFTP server.
Server port The port used by the target SFTP server. Standard port is 22.
Login Username for the SFTP server.
Password Password for the SFTP user.
Use temp file
Causes files to be named with .part extension on the server during active upload. When
the upload completes, the file is renamed to the appropriate extension (.mov, .mp4 or
.avi).
Prerequisites
l Channels and recorders are already added for AFU, see Choose files to include in AFU
l AFU is enabled and the parameters configured, see Enable AFU and set parameters.
To configure upload to an SFTP server:
1. From the Automatic File Upload configuration page, select SFTP Client as the protocol transfer type.
2. Specify the target Server address. If your system is configured with DHCP or has a valid DNS
configuration (see Configure DHCP), you can use the server’s fully qualified domain name instead of
the IP address.
3. Specify the Server Port used for the target SFTP server. The standard port is 22.
387