User Manual
Pearl-2 User Guide Enable AFU and set parameters
4. Check Automatic file upload and click Apply.
What's Next
After you've enabled AFU for your channels and recorders, enable AFU and configure the AFU settings for the
location type (i.e. FTP, USB, AWS, etc).
Enable AFU and set parameters
After configuring the channels and recorders you want included in your Automatic File Upload (AFU) schedule,
you must enable AFUand configure the frequency of file transfers.
The first transfer takes place when the configured frequency is reached. All recorded files that complete
during that time period are included in the transfer. Currently recording files are not included in an AFU
transfer until the recording has ended.
Files saved before you complete automatic file upload configuration are not included as part of
the automatic upload. You can manually transfer those files, see Download recorded files
manually.
The following table describes the available AFU options.
377