User Manual

Pearl-2 User Guide Record using One Touch control
3. Click Start to start recording the channel and click Stop to stop recording.
If the Start button is not active, there are no active sources for this channel or recorder.
Check your inputs to ensure signals are working as expected.
You can navigate away from the recording page without affecting the recording.
Record using One Touch control
 Pearl-2's One Touch recording and streaming control allows you to control your recording and streaming
across any number of channels and recorders with a single tap on the touch screen. Channels and recorders
are enabled for One Touch recording by default. For more information, see One Touch streaming and
recording control.
 To control recording using One Touch control:
1. Login to the Admin panel as admin or operator, see Connect to the Admin panel.
2. Configure your channels and recorders for One Touch control, see Specify channels and recorders for
One Touch recording.
3. Tap the One Touch control icon along the bottom of the touch screen to display the One Touch
control screen.
346