User Manual

Pearl-2 User Guide Restrict viewers by IPaddress
To return the channel to the global access control settings, select Use global settings from the drop
down and click Apply. The configuration fields are disabled and any changes to the configuration fields
are not saved.
Global LDAP settings are always enforced. Any local settings are in addition to LDAPsign on.
5. (Optional) Specify a password for viewers of this channel. The password is masked as you enter it.
If you have global allow/deny lists or a global user password, you can override the global
settings and remove all access control for a channel by selecting Use these settings and
leaving all the fields blank.
6. (Optional) Enter the allow and deny IP addresses for viewers of this channel. See Restrict viewers by
IPaddress for details about allow anddeny lists.
7. Click Apply.
Restrict viewers by IPaddress
Pearl-2 permits you to restrict which computers can access broadcasts by building a list of allowed and denied
IP addresses. You can do this at a global level for the system and can also override these settings on a per-
channel basis. Both global and per-channel configuration procedures are described.
The following table describes what happens when an IP address is added to the allowed and denied IP address
lists.
Item Description
Allow IP's
Users connecting from addresses in this list are permitted to view broadcasts from the
302