User Manual

Pearl-2 User Guide About automatic channels Auto A and Auto B
For example, if you attach an SDI source to the "SDI-A" slot and then HDMI into the "HDMI-A" slot,
Auto A will show HDMI and use HDMI audio. If the HDMI video signal is lost or you manually select the
SDI audio source using the custom layout editor, Auto A will switch to SDI video with SDI audio.
If all the connected sources lose signal at the same time (i.e. for the example above when SDI loses video
signal, and no other video signal is found on the HDMI source) no change is made and the auto channel
continues to use the current source. In this case, a no signal image is displayed for viewers.
You can see which video and audio sources are configured for the channel from the Info page, see View
system information using the Admin panel
195