User Manual
Pearl-2 User Guide Change the HTTP/HTTPS port values
Change the HTTP/HTTPS port values
On Pearl-2, the default HTTP port is 80 and the default HTTPS port is 443. If the default ports used by Pearl-2
are not available on your network, you can change them using the Admin panel. Consult your system
administrator for the correct port values to use for HTTPand HTTPS traffic.
Ensure that the port value you choose is unique and is not currently assigned on Pearl-2, see
Network ports used by Pearl-2.
To change the HTTP/HTTPS port values using the Admin panel:
1. Login to the Admin panel as admin, see Connect to the Admin panel.
2. From the Configuration menu, select Security. The Security configuration page opens.
3. Under HTTPS configuration, change the default HTTP and HTTPS port numbers. Click Apply when
you're done.
Secure connection (HTTPS) must be checked before you can change the HTTPS port.
4. Reboot Pearl-2 when prompted. After the system has finished rebooting, log back in to the Admin
panel as admin and verify that all changes were applied.
Perform network diagnostics
You can perform basic network troubleshooting tasks from the Network configuration page using the Admin
panel. To troubleshoot networking issues yourself, gather the IP address and MAC address of your Pearl-2
100