User Manual

Pearl-2 User Guide Configure a static IP address

2. Tap System Status to see the System Status page.

3. Tap Back to return to the System Settings screen, or the Home icon to return to the channel view.

If the system settings control icon won't appear when you tap the touch screen, it may be

disabled. See Configure the touch screen to enable system information.

Configure a static IP address

There are two ways you can set up Pearl-2 to use a static IP address:

l From the Network configuration page using the Admin panel.

l From the Settings menu using the touch screen on Pearl-2

TIP: Using the touch screen, you can choose to apply a configuration presetthat contains a static network IP.

See Configuration presets.

Only IPv4 addresses are supported. Pearl-2 does not support IPv6.

To configure a static IP address using the Admin panel:

1. Login to the Admin panel as admin, see Connect to the Admin panel.