User Manual

Setting QuickTime Options for Recording Videos
2. Enter the IP Address of the device you want to add or click on the triangle
beside the Network Address box and select the device from the list of
networked devices.
3. Select Connect.
4. To remove a device select the device and select the minus sign.
Figure 23 QuickTime settings
Configure the following QuickTime recording options:
Video resolution Select a video resolution option:
Actual
: The actual resolution of the video source as
reported to QuickTime. No scaling is performed. If,
at any point during a recording session, no signal
is detected an error will occur that could interrupt
the recording session.
Default
: If a video signal is not detected, the default
resolution is reported and the video remains blank
until a signal is detected. If the default resolution
61 SDI2USB 3.0 User Guide