User Manual

Mac OS X SDI2USB 3.0 Video Capture Application
The following messages may appear in the capture window.
•
Detecting Video Mode
as the video capture application starts up and
attempts to connect with the frame grabber.
•
Tuning Capture Parameters
if the video capture application finds the frame
grabber and begins synchronizing and tuning capture settings and image
adjustments
•
No Signal Detected
if the video capture application cannot connect to the
frame grabber or if the frame grabber is not connected to an active video
source.
Figure 22 Mac OS X toolbar
If the video capture application successfully connects to and synchronizes with the
frame grabber, the video capture application window begins displaying captured
images.
Title Bar Displays the Epiphan product name, screen resolution and refresh
rate of the video source.
Toolbar Use the icons on the toolbar to save, copy or print the currently
captured image, to record video, override image adjustments,
select devices for connection or to show information about the
device.
55 SDI2USB 3.0 User Guide