User Manual

Installing SDI2USB 3.0 on a video capture workstation running Windows
5. Unzip the downloaded file. Right-click on the .zip file and choose
Extract All
.
6. Run the Setup Utility (setup.exe) and follow the prompts to install the
software.
7. The Windows drivers and Epiphan Capture Tool is now installed.
5.2 To upgrade to the latest Windows software
version
From time to time Epiphan releases new versions of Epiphan capture software
available from the Epiphan web site. To confirm you have the latest capture software,
select Check for Updates from the Help menu.
Note:
Check for Updates will only recommend an update if Epiphan recommends that
you install a new version. This will happen if the latest version contains significant bug
fixes or enhancements. If a new Epiphan Capture Tool version contains only minor
changes, Check for Updates may not recommend that you install a new version.
You can upgrade the Epiphan software on your Windows video capture workstation by
uninstalling the previous version. If you have problems upgrading the Windows
version of the software, see the detailed driver update instructions and install/uninstall
instructions available at
http://www.epiphan.com/downloads
.
5.3 Finding Software Updates
To find the latest versions of all Epiphan software for Windows go to
http://www.epiphan.com/downloads
. You can also browse to the download page for
your SDI2USB 3.0 product - browse to http://www.epiphan.com and select
Products >
Frame Grabbers > SDI2USB 3.0
. On these pages you will find the most recent
versions of:
• Epiphan SDI2USB 3.0 User Guide.
• Epiphan USB device driver and Epiphan Capture Tool for Windows.
13 SDI2USB 3.0 User Guide