Standalone VGA Grid User's Guide

Standalone VGA Grid User Guide
Apply theFactory default configuration preset
Apply theFactory default configuration preset
Your Standalone VGA Grid comes with a special factory default configuration preset.This configuration preset
cannot be erased and is always presented at the top of the configuration presets list. It contains all possible
configuration settings groups.
Using the Factory default configuration setting is similar to using the Factory reset method (see Perform
factory reset) with a few important differences.
In short, the Factory default configuration preset is less destructive than Factory reset. This table
describes the exact differences.
Table 18 Factory default configuration preset vs Factory reset

Factory default
configuration preset
Factory reset function
Deletes all created channels
ü ü
Deletes all recorded files in channels
ü
Deletes all created recorders
ü ü
Deletes all recorded files in recorders
ü
Resets network configuration
ü ü
Resets user passwords
ü ü
Deletes all created configuration presets
ü
Deletes all branding files
ü
Resets all Source settings
ü ü
Resets EDID to factory
ü ü
Deletes all SCP/SFTP identities
ü ü
Deletes all LDAP settings
ü ü
Deletes all Automatic file upload settings
ü ü
To apply the factory default configuration preset, follow the instructions in Apply theFactory default
configuration preset and select the Factory default preset. A reboot is required.
81