Standalone VGA Grid User's Guide
Standalone VGA Grid User Guide
Create a configuration preset
Table 17 Configuration group definitions
Group Name Symbol Settings included in the configuration group
System
Date and time settings, serial port settings, remote support settings, custom
disk check schedule, access passwords, deny/allow lists and LDAPconfiguration
settings.
Network Network settings and tethering configuration.
Sources
All audio and video source configuration settings (including no signal images)
except EDID settings, which are in their own group.
Channels
All channel configuration data and current recording state, all layouts, images
used in layouts, streaming state, all recorder configuration data and current
recording state, individual and global UPnP settings.
AFU
Automatic file upload type and parameters, including SCP/SFTPidentity (stored
in an encrypted form).
EDID
EDID settings for sources. (Applying configuration presets with this group
automatically applies the included EDIDs. This process can take a while.)
Note that SFTP/SCP private keys are included (in encrypted format) in the automatic file upload
preset.
Create a configuration preset
You can create as many configuration presets as you need, however there is a limit to the amount of space
you have for configuration presets (256 MB). For each configuration preset you create, you get to name the
preset and choose the groups of setting types to include. See Configuration groups for more information
about the groups of configuration items.
It's good practice, after completing configuration of your Standalone VGA Grid, to save a full backup (with all
groups selected) so you may restore it at a later date (i.e. after a change that wasn’t wanted or after a factory
reset).
77