Standalone VGA Grid User's Guide

Standalone VGA Grid User Guide
Perform network diagnostics
l for publishing (Stream to a server) - actual ports used is dependant on the server and protocol
l for File and recording transfer - actual ports used is dependant on your configuration
l remote support (when in use) - port 30 see Configure remote support
l firmware update (checks and downloads) - port 80
Perform network diagnostics
If your Standalone VGA Grid has network trouble, you can perform basic network troubleshooting tasks from
the Network configuration page. In addition to providing the system’s IP address and MAC address to your
network administrator, you can also ping an IP address or use traceroute to determine the path taken to an
address.
Not all networks support ping and traceroute.
To ping or traceroute an IP address:
1. Login to the Admin panel as admin. See Connect to the Admin panel.
2. Select the Network link in the Configuration menu; the network configuration page opens.
3. Enter your IP address into the Address field.
4. Click ping or traceroute; an animation appears to the left of the address to indicate processing is
underway.
5. Upon completion of the command, read the results from the console-like display is shown below the
Network Diagnostics setting.
71