Standalone VGA Grid User's Guide
Standalone VGA Grid User Guide
Configure network settings
Configure network settings
By default the Standalone VGA Grid uses DHCP to obtain an IP Address via an Ethernet-based network. If you
want to change the network settings, or if you’re having network-related issues, this section covers the
network-related topics.
l Verify IP address and MAC address
l Configure a static IP address
l Configure DHCP
l Tether to a mobile network
l Network ports used by Standalone VGA Grid
l Perform network diagnostics
Verify IP address and MAC address
The Admin panel shows you the system’s MAC address and current IP Address via the Network configuration
page.
To view settings on network configuration page:
1. Login to the Admin panel as admin. See Connect to the Admin panel.
2. Select the Network link in the Configuration menu; the network configuration page opens.
3. Note the MAC address and Current IP address listed at the top of the page.
Table 13 Network InformationFields
Label Description/Options
MACAddress
A media access control address (MAC address) is a unique identifier for the
network interface. The value is read-only and cannot be changed. You may need
to share this value with your system administrator.
64