Standalone VGA Grid User's Guide
Standalone VGA Grid User Guide
User administration
4. Start a web browser on the workstation and browse to: http://192.168.255.250/admin/
5. Log in as the administrator user with the user name admin and the admin password (by default there is
no password); the Admin panel opens.
6. Click the Networking link in the Configuration menu.
7. Select the radio button to use a static address and configure the system with a static IP address and
network settings relevant to the network being used. For specific details about the settings presented,
see Configure network settings.
8. Restore the previously saved network configurations on the workstation.
User administration
The Standalone VGA Grid has three configured users:
l admin
l operator
l viewer
By default, none of these users have passwords. For security purposes you should add passwords to the
admin and operator accounts.
This section describes the following user administration topics:
l User types and privileges
l Set or change user passwords
l Remove user passwords
l Overcome lost passwords
l Configure LDAP
l Change the logged-in user
l Restrict viewers by IPaddress
User types and privileges
Standalone VGA Grid's three user accounts are admin, operator and viewer. The user account names cannot
be changed and the accounts cannot be disabled. By default, none of the accounts have passwords.
Admin
The admin account is used for all system configuration. This user has access to all options in the Admin panel.
50