Standalone VGA Grid User's Guide

Standalone VGA Grid User
Guide
Configurationkeys forthirdparty APIs
Key Values Description
Use udp or "" for udp transport
Use tcp for tcp transport.
rtmp_username string Specifies the username for the RTSP server.
rtmp_password string Specifies the password for the RTSPserver.
RTP/UDP configuration keys (Publish type 3)
The following settings are supported when the publish type is set to RTP/UDP. For more information on
RTP/UDP and these settings, see What is streaming?.
Table 57 Supported RTP/UDP configuration keys
Key Values Description
unicast_address string (IP address) Specifies the unicast/multicast address.
unicast_aport
1000...65535,
but not 5557
Specifies the UDP port for RTP/UDP audio streaming. Note
port 5557 is used for network discovery and cannot be used
for streaming.
unicast_vport
1000...65535,
but not 5557
Specifies the UDP port for RTP/UDP video streaming. Note port
5557 is used for network discovery and cannot be used for
streaming.
MPEG-TS configuration keys (Publish types 4 and 5)
The following settings are supported when the publish type is set to MPEG-TS and for associated SAP
distribution. For more information on MPEG-TS and these settings, see What is streaming?Viewing with
Session Announcement Protocol (SAP).
Table 58 Supported MPEG-TS and SAP configuration keys
Key Values Description
unicast_address string (IP address) Specifies the unicast/multicast address.
unicast_mport
1000...65535,
but not 5557
Specifies the UDP port for MPEG-TS streaming. Note port 5557
is used for network discovery and cannot be used for
streaming.
sap
on
empty string("")
Enables sharing of recorded files via SAP.
346