Standalone VGA Grid User's Guide

Standalone VGA Grid User
Guide
Configurationkeys forthirdparty APIs
Key Values Description
IPaddresses and/or
ranges.
empty string("")
UPnP configuration keys
The following settings are supported for UPnP streaming.
Table 49 Supported UPnP Streaming configuration keys
Key Values Description
share_archive
on
empty string("")
Enables sharing of recorded files via UPnP.
To enable sharing files over UPnP, set to on.
To disable sharing files over UPnP, set to an empty string ("").
share_livestreams
on
empty string ("")
Enables sharing of the live stream via UPnP.
To enable stream sharing over UPnP, set to on.
To disable stream sharing over UPnP, set to an empty string
("").
server_name string
Specifies the UPnP server name.
To use the system name, set to an empty string ("").
Frame grabber configuration keys
These configuration keys are not supported for use with Standalone VGA Grid. Please perform tweaks to the
frame grabber using the Admin panel. See Configure a source.
The following configuration settings are supported by the system. See Configure a sourcefor more
information on each variable.
Table 50 Supported Frame Grabber configuration keys
Key Values Description
gain 0...255
Specifies ADC gain adjustments.
0 is brightest, 255 is darkest.
hshift -999...999
Specifies horizontal shift.
For shifts to the left, use positive values.
For shifts to the right, use negative values.
340