Standalone VGA Grid User's Guide
Standalone VGA Grid User
Guide
Configurationkeys forthirdparty APIs
Configurationkeys forthirdparty APIs
Using HTTP or RS-232, you can send commands to the system to query or configure the system. For the RS-
232 and HTTP syntax see Control with RS-232 / serial port and Control with HTTPcommands.
Using a "SET" command in RS-232 must always follow with the "SAVECFG" command for the new
configuration setting(s) to take effect.
When setting keys to values with spaces use the following syntax.
For RS-232:
Enclose in quotes: SET.2.framesize="640 x 480"
For HTTP:
Encode each space as %20: set_params.cgi?framesize=640%20x%20480
The following sections describe the API keys supported by the system in each of these categories:
l System-level settings keys (read-only)
l System-level settingskeys (read/write)
l System-level custom layout keys (read/write)
l Recording configuration keys
l HTTP server configuration keys
l IP-based access control configuration keys
l UPnP configuration keys
l Frame grabber configuration keys
l Broadcast configurationkeys
l Channel encoder configuration keys
l Channel layout configuration keys
l Audio configuration keys
l Stream publishing configuration keys
336