Standalone VGA Grid User's Guide
Standalone VGA Grid User Guide
AFU or copy to USB drive
7. Click Apply; if there are any problems the system notifies you with a message: One or more parameter
values are not valid and those were not applied!
The following table describes the options applicable to configuring upload using SCP.
Table 36 SCP Automatic Upload Configuration Options
Name Description /Options
Server address The IP address (or fully qualified domain name) of the destination server.
Server port The SCP port used by the target server. Standard port is 22.
Login Username for the SCP server.
Password Password for the SCP user.
AFU or copy to USB drive
The system is equipped with USB ports that can be used to copy files from internal storage to external USB
flash drives or hard drives. An example use of this feature is to provide speakers with a copy of their
presentation before they leave the presentation venue.
The external drive must be formatted with one of the following file systems:
l FAT16 l FAT32 l XFS
l EXT2 l EXT3 l EXT4
l NTFS
Only the first attached USBdrive is used for automatic file upload. If more than one USBdrive is
attached before system power up, behavior is unpredictable.
File transfer to a USB drive occurs in one of the following ways. This section describes the procedures.
l AFU to a USB drive
l One-time copy/move of all recorded files to USB drive
l Manually copy recorded files to USB drive
l View available USBstorage space
l Safely eject the USBdrive
282