Standalone VGA Grid User's Guide

Standalone VGA Grid User Guide AFU using SCP
2. Specify the target Server address. If your system is configured with DHCP or has a valid DNS
configuration (see Configure DHCP), you can use the server’s fully qualified domain name instead of
the IP address.
3. Specify the Server Port used for the destination SCPserver. The standard port is 22.
4. Enter the SCP account username in the Login field.
5. Enter the SCP account password in the Password field; the characters are masked with dots.
(Alternatively you can choose to use a private key instead of a password for authentication.)
For secure copy you can upload an SSHidentity for your Standalone VGA Grid. This key
must be trusted by the destination server. Details for generating the key and setting up
this trust are beyond the scope of this document.
6. If desired, scroll down to the section labelled SSHidentity for SCPand SFTP clients.
1. If no identity is uploaded, or to upload a new identity (overwrites the old identity):
a. Click Choose File; a file selection dialog opens.
b. Select the private key file from your hard drive and click Open.
The system accepts RSA keys for SSH-1; DSA, ECDSA, EC25519 and RSA for SSH-2.
Keys must be in OpenSSH format.
c. Click Upload to upload the file.
2. Use the Test your key field to test your uploaded key against the secure server, if desired.
281