Standalone VGA Grid User's Guide

Standalone VGA Grid User Guide
Record with a recorder
4. If the all channels box is selected, click it to deselect it; the other check boxes are enabled.
5. Click the check boxes for the desired channels.
Channels with no active video source are displayed in italics. You can include these channels
in your channel selections for the recorder.
6. Click Apply; the changes are reflected in the recorder configuration page.
Record with a recorder
Recorders are stopped and started via their configuration page. Multiple recorders and channel recordings can
occur concurrently.
The number of channels being recorded is displayed below the recording stop/start buttons. To configure the
channels being recorded, see Change the channels recorded by a recorder.
To start and stop recorder:
256