Standalone VGA Grid User's Guide

Standalone VGA Grid User Guide Stream to a CDN
10. If there are no Start and Stop streaming buttons on-screen, click Apply; the page refreshes and the
Start and Stop streaming buttons appear.
11. If streaming is enabled (started), click the Stop streaming button (next to the Publish Status label);
streaming is disabled.
12. Enter the channel name in the Short channel name field.
13. Enter your Original Livestream Username and Password in the next two fields.
14. Click Apply.
15. When ready to begin streaming, click Start. (See See Controlling streaming and recording using Epiphan
Live for instructions on streaming control using the Epiphan Live control interface).
When the connection to Original Livestream has been established, the stream name appears on the
channel's Status page, similar to this example from Wowza Streaming Cloud.
After clicking Apply, there may be a short 2-3 minute delay before the live stream is displayed.
217