Standalone VGA Grid User's Guide

Standalone VGA Grid User Guide Stream to a CDN
7. If there are no Start and Stop streaming buttons on-screen, click Apply; the page refreshes and the
Start and Stop streaming buttons appear.
8. If streaming is enabled (started), click the Stop streaming button (next to the Publish Status label);
streaming is disabled.
9. Enter the ingestion point url provided by the CDN or media server.
10. Check the Use TCP for RTP stream checkbox. Verify which transport protocols your CDN provider
supports.
11. Enter a user name and password.
12.
The CDN provider assigns a user name and password to authenticate the publisher.
Contact the CDN provider for your log in credentials.
13. Click Apply.
14. When ready to begin streaming, click Start. (See See Controlling streaming and recording using Epiphan
Live for instructions on streaming control using the Epiphan Live control interface.)
To stream content to a CDN using RTMP push
1. Login to the Admin panel as admin. See Connect to the Admin panel.
2. From the Admin panel, click a Channel; the menu expands.
3. Click Streaming; the channel's Streaming page opens.
4. Click the Publish drop-down menu.
5. Choose using RTMP push from the drop-down menu.
209