Standalone VGA Grid User's Guide
Standalone VGA Grid User Guide Restrict viewers by IPaddress
5. Select Use these settings from the drop down list; the configuration fields are enabled.
Global LDAP settings are always enforced. Any local settings are in addition to LDAPsign on.
6. If desired, specify a password for viewers of this channel; the password appears masked as you type it.
If you have global allow/deny lists or a global user password, you can override the global
settings and remove all access control for a channel by selecting Use these settings and
leaving all the fields blank.
7. If desired, specify allow and deny IPs for viewers of this channel. See Restrict viewers by IPaddress for
more information about allow anddeny lists.
8. Click Apply at the bottom of the page.
To return a channel to the default(global)access control settings:
1. Login to the Admin panel as admin. See Connect to the Admin panel.
3. From the Admin panel, click Streaming for the desired channel; the streaming page opens.
4. Scroll to the Stream access control section of the page.
5. Select Use global settings from the drop down list; the configuration fields are disabled (any changes
to the configuration fields are not saved).
6. Click Apply at the bottom of the page.
Restrict viewers by IPaddress
The Standalone VGA Grid permits you to restrict which computers can access broadcasts by building a list of
allowed and/or denied IP addresses. You can do this at a global level for the system and can also override
199