Standalone VGA Grid User's Guide

Standalone VGA Grid User Guide Restrict access to streams for viewers
3. Uncheck Enabled to disable streaming to viewers (or check to enable).
4. Click Apply at the bottom of the page.
Restrict access to streams for viewers
Standalone VGA Grid can restrict access to all viewer streams using global viewer passwords and IPallow/deny
lists. See Set or change user passwords and Restrict viewers by IPaddress
If LDAP is configured for viewer authentication, the viewer must pass global autentication using
LADAP credentials (or the viewer global password, if there is one) and must meet the local channel
settings (come from an allowedIP address). See Configure LDAP for more information on LDAP
configuration.
To restrict viewers for a channel:
1. Login to the Admin panel as admin. See Connect to the Admin panel.
3. From the Admin panel, click Streaming for the desired channel; the streaming page opens.
4. Scroll to the Stream access control section of the page.
198