Standalone VGA Grid User's Guide

Standalone VGA Grid User Guide Configure HTTP and RTSP streaming ports
5. Jot down the either the Live Broadcast , RTSP stream or other web streaming address. This is the
address you can send to viewers or to create a link to your broadcast.
Users must install Bonjour Print Services on their Windows or Mac computer to access the live
Preview using the serial number.
If you're seeing URLs with serial numbers instead of IPaddresses and want to change this, log into
the Admin panel by IP address (instead of by Serial number/Bonjour Print Services) to see
URLswith the IPaddress. (See Connect to the Admin panel.)
Configure HTTP and RTSP streaming ports
For RTSP streaming directly to users on your LAN the only information required to view the broadcast is the
URL and the port number used to stream the broadcast.
Port numbers are also used for HTTP streaming methods such as FLV, ASF andMPEG-TS. By default, each
channel has a unique HTTP and RTSP port number.If needed, you can modify these port numbers. Be sure to
always use unique numbers for each channel.
To set the HTTP and RTSP streaming ports for streaming to viewers on the same network, follow the steps
below.
1. Login to the Admin panel as admin. See Connect to the Admin panel.
2. From the Admin panel, click a Channel; the menu expands.
3. Click Streaming; the channel's Streaming page opens.
189