Standalone VGA Grid User's Guide

Standalone VGA Grid User Guide
Video looks squished (VGA sources only)
one frame is carried over to the next frame. The result is a blurred image and horizontal lines running across
the video.
To convert an interlaced source signal to a non-interlaced signal.
1. Login to the Admin panel as admin. See Connect to the Admin panel.
3. From the Admin panel, scroll to the Sources menu option.
4. Click on the desired video source ; the source configuration page opens.
5. Enable the Enable deinterlace setting.
6. Click Apply. View the output in the Snapshot preview below.
Video looks squished (VGA sources only)
The image is squeezed horizontally on the screen. This distortion occurs when there's a mismatch between the
aspect ratio the Standalone VGA Grid detects and the aspect ratio that is sent from the source signal. To
compare the two signal values, you must know the aspect ratio that the source is sending.
1. Login to the Admin panel as admin. See Connect to the Admin panel.
3. From the Admin panel, click Info; the info window opens with a list of all configured channels.
181