Standalone VGA Grid User's Guide
Standalone VGA Grid User Guide
Force the capture card to use a specific EDID
Restore factory default EDID
When you have finished with a custom EDID, you can restore the capture card (in the Sources list) to the
default EDID.Currently there is no way to tell if your capture card is using a custom EDID. If you are unsure,
restoring to factory default is the best approach.
To restore the default EDID:.
1. Login to the Admin panel as admin. See Connect to the Admin panel.
3. From the Admin panel, scroll to the Sources section.
4. Click the capture card(source) for which you wish to restore the EDID; the source configuration page
opens.
5. Scroll to the EDIDsection.
6. Click the restore button.
7. The screen updates with a status indicator.
8. When the EDID restoration is complete, the page updates to reflect the action is completed.
178