Standalone VGA Grid User's Guide
Standalone VGA Grid User Guide Configure a source
Value Description
value, set a high value for the Gain to balance the two.
Configurable for VGA sources only.
Aspect Ratio
Sets the aspect ratio of the captured image. The default is 4:3. Set the value to
Wide mode when capturing images that have a wide aspect ratio. Using the
incorrect setting causes the image to be distorted or stretched.
Configurable for VGAsources only.
HSync threshold
Adjust horizontal sync detection.
Configurable for VGA sources only.
VSync threshold
Adjust vertical sync detection.
Configurable for VGA sources only.
Rotate
This feature is useful when a source captures video that is rotated 90⁰ or is
displayed upside down. Choose one of the following values to change the video
orientation while streaming:
l No rotation
l 90⁰ clockwise
l 90⁰ counter clockwise
l 180⁰
Enable
deinterlacing
Enable this feature to convert an interlaced source signal to a non-interlaced
signal.
S-Video signals
The following options are available for S-Video signals via S-Video ports.
Signal type
Specify the video source connected to the S-Video input source. The options are
Default, Composite, S-Video.
SDI signals
The following options are available for signals via the SDI port.
167