Standalone VGA Grid User's Guide
Standalone VGA Grid User Guide
Connect an RTSP source
You can rename the source by clicking on the default source name at the top of the page
("RTSP 1" in the screenshot above). See Rename a source for more information.
4. Under the Settings header, fill out the Source URL, Username and Password fields with information
configured from your source RTSP device (see List of tested RTSP-based IP cameras for source URL
syntax and credentials specific to IP cameras we at Epiphan have tested), and select either UDP or TCP
from the Preferred transport dropdown menu.
Optionally, you can also fill out the "No signal" image settings, if desired. See Add a No Signal image to a
source for more information.
See Stream content using HTTPor RTSP if using another Standalone VGA Grid as an RTSP
source.
159